WH-26

Artikelnummer: WH-26

WH-26 2 Finger Druckfedermaschine 0.6-2.6mmmm

Kategorie: Druckfedermaschinen


Preis auf Anfrage
sofort verfügbar


Beschreibung


2-point coiling machine with a wire diameter of 0.6 tto 2.6 mm


  • Enables easy setup and high-accuracy, high-speed production of springs.
  • The clockwise/counterclockwise direction can be switched simply by configuring a setting in the program.
  • An optional rotation point servo and initial tension servo can be added to the coiling point.
  • The alignment of the cut tool and core does not require readjustment after being decided once.
  • One-touch switching between oscillating cut and straight cut. The oscillating cut bearing (oscillation) can be freely adjusted.
  • An optional slip sensor is provided for detecting slips when feeding
  • Includes our newly-developed specialist MNO program for spring production, enabling simple and precise operations.


  • Dedicated MNO Program for Spring Production


  • Easy operations for quicker preparation.
  • High resolution for controlling the latest servo motors.
  • Compatible with compression spring creation programs based on line graphs.
  • Allows varied control based on measurement results, such as the pitch and diameter.
  • Common program for both torsion machines and coiling machines.
  • Includes a motor sensor system.
  • Versatile production management screen and production data collection function.


  • 2-point coiling mechanism


  • Enables the clockwise/counterclockwise direction to be switched simply by configuring a setting in the program. Heavy sliding parts do not need to be changed during replacement.
  • Can produce coils with an outer diameter of up to 70 mm, increasing the range of items that your company can produce (wire guide length: 110 mm).


  • Taper synchronization constant


  • Enables the taper tilt to be managed with a value from 0 to 100.
  • Suitable for load adjustment in addition to shape adjustment, as fine adjustment can be performed in 100 levels.


  • Advanced cut slide function


  • The alignment of the cut tool and core does not require readjustment after being decided once.
  • As the cut slide and core slide are both located on the center slide, the positional relationship of the two tools does not change, meaning that readjustment is not required
  • The cutting method can be changed. You can easily switch between oscillating cut and straight cut.
  • The oscillating cut bearing (oscillation) can be adjusted. Adjust the bearing using the eccentric pin on the slide.

  • Durchmesser: 0.6-2.6mm

    Video

    Katalog

    Katalog